Model | CRD-500W-12V-L | CRD-500W-24V-L | CRD-500W-48V-L | |||||||
AC voltage | 100/110/120/220/230/240VAC | |||||||||
Rated power | 500W | |||||||||
Surge power | 1000W(for few seconds) | |||||||||
Waveform | Pure Sine Wave(THD<3%) | |||||||||
Output | Frequency | 50/60Hz±3Hz | ||||||||
DC voltage | 12V | 24V | 48V | |||||||
Voltage range | 10~15VDC | 20~30VDC | 40~60VDC | |||||||
Input | Efficiency | >87.0% | >90.0% | >90.0% | ||||||
Bat.low voltage alarm | ||||||||||
11±0.5VDC | 22±1VDC | 44±2VDC | ||||||||
Bat.low voltage shut | ||||||||||
down | 10±0.5VDC | 20±1VDC | 40±2VDC | |||||||
Overload | Shutdown,then start automatically. | |||||||||
Over voltage | 15±0.5VDC | 30±1VDC | 60±2VDC | |||||||
Protection | Over temperature | Shut-off output voltage, recover automatically after temperature goes down | ||||||||
Short circuit | Shut-off output voltage, restart to recover | |||||||||
Bat.reverse polarity | Reverse protection circuit:A reverse protection circuit no burning fuse | |||||||||
polarity | ||||||||||
*60V/72V/96V/110V----These specifications can also be customized. *These data are from our laboratory. |
Contact Person : | Rachel |
---|